Optimization of cassava peel ash concrete using central composite design method.

Cassava peel ash (CPA) is an abundant agricultural byproduct that has shown promise as an additional cementitious material in concrete manufacturing. This research study aims to optimize the incorporation of CPA in concrete blends using the central composite design (CCD) methodology to determine the most effective combination of ingredients for maximizing concrete performance. The investigation involves a physicochemical analysis of CPA to assess its pozzolanic characteristics. Laboratory experiments are then conducted to assess the compressive and flexural strengths of concrete mixtures formulated with varying proportions of CPA, cement, and aggregates. The results show that a mix ratio of 0.2:0.0875:0.3625:0.4625 for cement, CPA, fine, and coarse aggregates, respectively, yields a maximum compressive strength of 28.51 MPa. Additionally, a maximum flexural strength of 10.36 MPa is achieved with a mix ratio of 0.2:0.0875:0.3625:0.525. The experimental data were used to develop quadratic predictive models, followed by statistical analyses. The culmination of the research resulted in the identification of an optimal concrete blend that significantly enhances both compressive and flexural strength. To ensure the reliability of the model, rigorous validation was conducted using student's t-test, revealing a strong correlation between laboratory findings and simulated values, with computed p-values of 0.9987 and 0.9912 for compressive and flexural strength responses, respectively. This study underscores the potential for enhancing concrete properties and reducing waste through the effective utilization of CPA in the construction sector.

Role of extreme vertex design approach on the mechanical and morphological behaviour of residual soil composite.

This research work reports the usability of binary additive materials known as tile waste dust (TWD) and calcined kaolin (CK) in ameliorating the mechanical response of weak soil. The extreme vertex design (EVD) was adopted for the mixture experimental design and modelling of the mechanical properties of the soil-TWD-CK blend. In the course of this study, a total of fifteen (15) design mixture ingredients' ratios for water, TWD, CK and soil were formulated. The key mechanical parameters considered in the study showed a considerable rate of improvement to the peak of 42%, 755 kN/m2 and 59% for California bearing ratio, unconfined compressive strength and resistance to loss in strength respectively. The development of EVD-model was achieved with the aid of the experimental derived results and fractions of component combinations through fits statistical evaluation, analysis of variance, diagnostic test, influence statistics and numerical optimization using desirability function to analyze the datasets. In a step further, the non-destructive test explored to assess the microstructural arrangement of the studied soil-additive materials displayed a substantial disparity compared to the corresponding original soil material and this is an indicator of soil improvement. From the geotechnical engineering perspective, this study elucidates the usability of waste residues as environmental friendly and sustainable materials in the field of soil re-engineering.